Restoration services
Mold Remediation
Mold needs moisture to grow. That is the single most important fact about mold in a home. The EPA states there is no practical way to remove every mold spore indoors, so the goal of remediation is to remove mold growth safely and fix the moisture problem that caused it. If the moisture is not fixed, the mold comes back.
The Restoration Resource is a free referral service, not a mold company. Call (855) 742-6216 and we will connect you with an independent local restoration company that offers mold remediation. A good company will contain the area, remove contaminated materials, clean what can be saved and help you find and stop the water source.
When you need mold remediation
- Visible mold on walls, ceilings, floors or belongings
- A persistent musty or earthy smell
- Mold returning after you cleaned it
- Water damage that was not dried within a day or two
- Stains or discoloration on drywall or wood after a leak
- Condensation problems on windows, pipes or in the attic
- Mold in a basement, crawlspace or bathroom that keeps spreading
When You Need Professional Mold Remediation
The EPA's guidance offers a useful rule of thumb: if the moldy area is less than about 10 square feet (roughly a 3 foot by 3 foot patch), you can often handle it yourself following EPA cleanup advice. Call a professional when:
- Mold covers more than about 10 square feet.
- Mold is inside walls, ceilings, ductwork or the HVAC system.
- The mold came from sewage or other contaminated water.
- Someone in the home has asthma, allergies, a weakened immune system or other health concerns.
- Mold keeps coming back after cleaning.
- You smell mold but cannot find it.
The EPA also advises against running an HVAC system you suspect is contaminated with mold, because it can spread spores through the home.
Mold Conditions Under the IICRC S520 Standard
Professional mold remediation follows the IICRC S520, the standard for professional mold remediation. It describes three conditions, which help define the goal of the job:
| Condition | What it means | Goal |
|---|---|---|
| Condition 1 | Normal fungal ecology: the kinds and amounts of mold you would expect in a clean indoor environment | The target after remediation |
| Condition 2 | Settled spores: area contaminated with spores or mold fragments that came from elsewhere, without active growth | Clean back to Condition 1 |
| Condition 3 | Actual growth: active or dormant visible or hidden mold growth | Remove growth and return to Condition 1 |
In plain terms, the job is not finished until the affected areas are back to normal, and the moisture problem is solved. This is also why simply spraying a product on visible mold falls short of the standard. Mold that is killed but left in place can still contain allergens, and spores that settled on nearby surfaces during the problem need to be cleaned up too.
The Mold Remediation Process Step by Step
- Inspection. The company looks for visible mold, measures moisture and tries to find the water source. Some homeowners also hire an independent assessor.
- Fix the moisture. Leaks, condensation or drainage problems must be corrected, or the mold will return.
- Containment. The work area is sealed with plastic sheeting. Negative air pressure, created with air machines that exhaust filtered air, helps keep spores from spreading to clean rooms.
- Protective equipment. Workers wear respirators, gloves, eye protection and often disposable suits.
- HEPA air filtration runs during the work to capture airborne spores and dust.
- Removal of moldy porous materials, such as drywall, insulation and carpet, which are bagged and removed carefully.
- Cleaning of salvageable surfaces like framing and hard surfaces, usually with HEPA vacuuming, damp wiping and scrubbing or sanding where needed.
- Drying of the area with dehumidifiers.
- Post-remediation verification. A visual check, and sometimes testing by an independent professional, confirms the area is clean before rebuilding.
- Rebuild with new drywall, insulation and finishes.
Learn more in our guide to the mold remediation process.
Where Mold Hides in a Home
Mold grows wherever moisture lingers. Places restoration crews often find it:
| Area | Common moisture source |
|---|---|
| Behind drywall and under sinks | Slow plumbing leaks, failed supply lines |
| Attics | Roof leaks, bathroom fans venting into the attic, poor ventilation |
| Crawlspaces | Ground moisture, humid outdoor air, plumbing leaks |
| Basements | Seepage, high humidity, past flooding |
| Bathrooms | Shower steam without proper exhaust, leaking tub or shower pans |
| Around windows | Condensation and failed flashing |
| HVAC systems | Condensation at the coil and drain pan, wet duct insulation |
| Under flooring and carpet | Past water damage that was not fully dried |
A musty smell with no visible mold often means growth is hidden in one of these areas. A good company will use moisture meters and inspection, not guesswork, to find it. Our guide to hidden water leak signs can help you spot the source early.
Do You Need Mold Testing?
Often, no. The EPA says that if mold growth is visible, sampling is usually not necessary, and there are no federal standards for acceptable levels of airborne mold. Testing can still be useful when:
- You smell mold but cannot see it.
- Someone in the home has health concerns and a doctor asks for more information.
- You want independent confirmation that remediation worked, sometimes called clearance testing.
- There is a legal, real estate or insurance question.
Some states, including Texas, Florida and New York, license mold assessors and remediators, and some do not allow the same company to both assess and remediate the same project. Ask about the rules in your state.
If you do test, testing should answer a specific question. Air samples are compared with an outdoor sample taken at the same time, because mold spores are always present outdoors. A single number on its own says little. Home test kits that use a dish left open on a counter will grow some mold almost every time, so they are rarely helpful in deciding what to do.
Health and Safety
According to the CDC and EPA, mold exposure can cause stuffy nose, wheezing, itchy eyes or skin, and can trigger asthma attacks in people with asthma. People with allergies, asthma, weakened immune systems or chronic lung disease are more sensitive.
What not to do:
- Don't scrape, sand or dry-brush mold without containment and protection. It releases spores.
- Don't paint or caulk over mold. The EPA says paint will not fix it and it is likely to peel.
- Don't rely on bleach. The EPA notes that using biocides like bleach is generally not recommended as a routine part of remediation; the goal is removal. Never mix bleach with ammonia.
- Don't run fans that blow across moldy areas, or the HVAC system if it may be contaminated.
- Don't let it sit. Mold keeps growing as long as moisture is there.
If you have health symptoms, talk with your doctor.
What Can Be Saved and What Must Go
| Material | Usual approach |
|---|---|
| Drywall with mold growth | Removed and replaced |
| Insulation | Removed and replaced |
| Carpet and pad with mold | Usually discarded |
| Ceiling tiles | Usually discarded |
| Wood framing and subfloor | Usually cleaned (HEPA vacuum, scrubbing, sanding) and dried, if structurally sound |
| Hard surfaces (metal, glass, tile, hard plastic) | Cleaned |
| Upholstered furniture and mattresses | Often discarded if moldy |
| Clothing and washable fabrics | Often saved with washing or dry cleaning |
| Books and papers | Case by case; valuable items may go to a specialist |
The EPA notes that absorbent materials like ceiling tiles and carpet may need to be replaced because mold can grow into their empty spaces and crevices.
Insurance and Cost Factors
Insurance. Homeowners policies generally cover mold only when it results from a covered event, such as a sudden pipe burst, and often with a separate, lower limit for mold. Mold from long-term leaks, humidity or poor maintenance is usually excluded. Some policies exclude mold entirely. Read your policy's mold or fungi section, and see our guide on mold after water damage.
What affects the cost:
- Size of the affected area and how many rooms are involved.
- Location: open walls, attics, crawlspaces and HVAC systems differ in difficulty.
- How much material must be removed and rebuilt.
- Containment and air filtration requirements.
- Whether independent testing or assessment is needed.
- Fixing the moisture source, which may involve a plumber, roofer or waterproofing contractor.
How to Choose a Mold Remediation Company
- Ask about IICRC certification in mold remediation, such as Applied Microbial Remediation Technician (AMRT).
- Check for any state license your state requires.
- Ask how they will find and fix the moisture source, not just remove visible mold.
- Ask how they will contain the area and protect the rest of the home.
- Get a written scope that lists what will be removed, cleaned and rebuilt.
- Ask how they verify the job is complete, and whether they support independent clearance testing.
- Be wary of companies that rely only on spraying or fogging without removal.
- Be cautious if the same company that found the mold pushes expensive extra testing or work you do not understand. Ask for the reason in writing, and get a second opinion if needed.
See our guide to choosing a restoration company, or call (855) 742-6216 to be connected with an independent local company.
How to Prevent Mold
- Dry water damage fast. The EPA says to dry damp or wet materials within 24 to 48 hours to prevent mold growth. See water damage restoration.
- Control humidity. The EPA recommends keeping indoor humidity below 60 percent, ideally between 30 and 50 percent.
- Run bathroom and kitchen exhaust fans vented to the outside.
- Fix roof, plumbing and window leaks promptly.
- Vent clothes dryers outdoors.
- Insulate cold surfaces like pipes and exterior walls to reduce condensation.
- Keep gutters clean and grade soil away from the foundation.
How it works
- Call (855) 742-6216Tell us what happened (water, flood, mold, fire or storm) and where the property is.
- Get connectedWe connect your call with an independent restoration company serving your area.
- Get it handledThe company inspects, explains the scope in writing and works with you and your insurer. You decide whether to go ahead.
Frequently asked questions
How quickly does mold grow after water damage?
According to the EPA, mold can begin growing on damp materials within 24 to 48 hours. That is why the EPA recommends drying wet materials within that window. Visible growth may take longer to appear, and mold can grow hidden inside walls or under flooring before you see it.
Can I remove mold myself?
For small areas, often yes. The EPA suggests homeowners can usually clean mold covering less than about 10 square feet themselves, using gloves, goggles and an N-95 respirator, and fixing the moisture source. Larger areas, hidden mold, mold from sewage, or cases involving people with health concerns are better handled by professionals.
Does bleach kill mold?
Bleach can kill mold on some hard surfaces, but it is not a complete solution. The EPA says biocides like bleach are generally not recommended as a routine part of remediation, because dead mold can still cause allergic reactions and the goal is to remove it. Bleach does not fix the moisture problem. Never mix bleach with ammonia.
Is black mold more dangerous than other mold?
The CDC says the color of mold does not tell you how dangerous it is, and that all molds should be treated the same way when it comes to health risks and removal. Any mold growth indoors should be removed and the moisture problem fixed.
Does homeowners insurance cover mold removal?
Sometimes. Mold is usually covered only when it results from a covered peril, like a sudden pipe burst, and many policies cap mold coverage at a lower limit. Mold from slow leaks, humidity or neglected maintenance is usually excluded. Read the mold or fungi section of your policy and ask your agent.
How long does mold remediation take?
It depends on the size and location of the mold, how much material must come out and how long drying takes. A small, contained area may be done in a day or two. Larger jobs involving several rooms, attics or crawlspaces take longer, plus time for any verification and rebuilding.
Will mold come back after remediation?
It will if the moisture source is not fixed. The EPA emphasizes that controlling moisture is the key to controlling mold. After remediation, keep humidity in check, fix leaks quickly and dry any new water damage within 24 to 48 hours.
Related guides
- What to Do After Water Damage: The First 24 to 48 Hours, Step by Step
- Does Homeowners Insurance Cover Water Damage? What Is Covered and What Is Not
- How to File a Water Damage Insurance Claim, Step by Step
- Mold After Water Damage: Why 24 to 48 Hours Matters and When to Call a Pro
- The Mold Remediation Process: What Professionals Do, Step by Step
- How to Choose a Water, Fire or Mold Restoration Company
Mold Remediation by city
- New York, NY
- Los Angeles, CA
- Chicago, IL
- Houston, TX
- Phoenix, AZ
- Philadelphia, PA
- San Antonio, TX
- San Diego, CA
- Dallas, TX
- San Jose, CA
- Austin, TX
- Jacksonville, FL
- Fort Worth, TX
- Columbus, OH
- Charlotte, NC
- Indianapolis, IN
- San Francisco, CA
- Seattle, WA
- Denver, CO
- Oklahoma, OK
- Nashville, TN
- El Paso, TX
- Washington, DC
- Boston, MA
- Las Vegas, NV
- Portland, OR
- Detroit, MI
- Memphis, TN
- Louisville, KY
- Baltimore, MD
Other restoration services
Water Damage Restoration
Get connected with a local pro who can extract water, dry your home to industry standards and repair what was damaged.
Flood Damage Cleanup
Find a local crew to pump out floodwater, remove contaminated materials, disinfect and dry your home safely.
Basement Flooding & Water Removal
Get help pumping out a flooded basement, drying walls and floors, and finding out why the water got in.
Burst Pipe Water Damage
When a pipe bursts or freezes, get connected with a local crew to remove the water and dry walls, floors and ceilings.
Sewage Backup Cleanup
Sewage is a health hazard. Get connected with a local crew trained to remove, disinfect and dry contaminated areas safely.
Fire Damage Restoration
After a house fire, get connected with a local restoration company for board-up, soot and water cleanup, odor removal and repairs.
Smoke & Soot Damage Cleanup
Get connected with a local pro to clean soot, remove smoke odor and clean HVAC systems after a fire, puffback or wildfire smoke.
Storm Damage Restoration
After a hurricane, tornado, hail or windstorm, get connected with a local crew for tarping, board-up, water removal and repairs.
Get restoration help
Water, flood, mold, fire, smoke and storm damage. Many local companies answer around the clock.
Call (855) 742-6216