Homeowner guide
What to Do After Water Damage: The First 24 to 48 Hours, Step by Step
Step-by-step plan for the first 24 to 48 hours after water damage: stay safe, stop the water, document everything, call insurance and start drying fast.
Call (855) 742-6216Quick answer
After water damage, put safety first: shut off power to wet areas if you can do it safely, then stop the water at the main shutoff valve. Photograph everything before you move it, remove standing water and wet belongings, and call your insurance company. The EPA advises drying water-damaged areas within 24 to 48 hours to help prevent mold, so call a professional restoration company early if the water is extensive, dirty or inside walls.
Why the first 48 hours matter
Water damage gets worse with time. In the first hours, water spreads across floors and wicks up into drywall, baseboards and cabinets. Over the next day or two, wood swells, adhesives loosen and finishes start to bubble or peel.
The biggest clock is mold. The U.S. Environmental Protection Agency (EPA) recommends drying water-damaged areas and items within 24 to 48 hours to help prevent mold growth. Clean water can also become contaminated as it sits and picks up dirt, bacteria and material from building products.
Your insurance policy also matters here. Most homeowners policies expect you to take reasonable steps to protect your home from further damage. Acting quickly protects your home, your health and your claim.
Step 1: Make sure everyone is safe
Before you touch anything, check for hazards. Water and electricity are a dangerous mix, and wet ceilings can fall without warning.
- Electricity: If water is near outlets, cords or the electrical panel, do not walk through it. If you can reach the breaker panel from a dry spot, turn off power to the affected area. If not, call your utility or an electrician.
- Sagging ceilings: A bulging ceiling may be holding water. Keep people and pets out of the room.
- Gas: If you smell gas, leave the home and call your gas utility or 911 from outside.
- Dirty water: If the water came from a sewer backup, toilet overflow or outside flooding, treat it as contaminated. Keep children, pets and anyone with a weak immune system away.
- Slip hazards: Wet floors, especially tile and hardwood, are slippery.
Step 2: Stop the water at the source
The fastest way to limit damage is to stop new water from coming in.
- Find the main water shutoff valve. It is often in the basement, crawlspace, garage, utility room or near the water heater. In warm climates it may be outside near the foundation or in a box near the street.
- Turn it clockwise (for a round gate valve) or a quarter turn so the handle is crosswise to the pipe (for a lever ball valve).
- Use local shutoffs if the leak is at one fixture. Toilets, sinks, washing machines and dishwashers usually have their own small valve.
- For a water heater leak, turn off the cold water supply to the tank and turn off its power or gas.
- For a roof or storm leak, catch dripping water in buckets and, if it is safe, cover openings from inside. Do not climb onto a wet roof.
If the source is a burst pipe, see our guide on burst and frozen pipes.
Step 3: Document everything before cleanup
Good documentation makes an insurance claim smoother. Take a few minutes to record the damage before you move or throw anything away.
- Take wide photos of each room, then close-ups of damaged floors, walls, ceilings and belongings.
- Record a short video walking through the home and narrating what you see.
- Photograph the source of the water, such as the failed supply line or cracked pipe. Keep the broken part if you can.
- Note the date and time you discovered the water.
- Write down the make, model and age of damaged appliances and electronics.
- Keep every receipt for supplies, equipment rental, hotel stays and meals.
If you must throw out wet items for health reasons, photograph them first and keep a small sample of carpet or flooring if practical. Your adjuster may want to see it.
Step 4: Call your insurance company
Report the loss as soon as you can. Most policies require prompt notice. When you call, ask:
- What is my claim number, and who is my adjuster?
- Do I need approval before hiring a restoration company or throwing anything away?
- Does my policy include additional living expenses if I cannot stay at home?
- Do I have a water backup endorsement or any limits on mold?
You do not have to wait for the adjuster to visit before starting emergency drying. Insurers generally expect you to prevent further damage. Keep records of what you do and why. Our guide on filing a water damage insurance claim walks through the full process.
Step 5: Remove water and move belongings
Once the area is safe, start getting water and wet items out.
- Remove standing water with towels, mops, buckets or a wet/dry vacuum. Do not use a regular household vacuum.
- Move furniture off wet carpet. Put aluminum foil or wood blocks under legs that cannot be moved, so stains do not transfer.
- Lift rugs and drapes off the floor.
- Take out valuables first: photos, documents, electronics and anything irreplaceable.
- Open cabinet doors and drawers so they can dry.
- Remove wet cushions from upholstered furniture and stand them on end to dry.
Skip this step for contaminated water. For sewage or floodwater, the safest move is to stay out and let a trained crew handle it with protective gear. See our sewage backup guide.
Step 6: Start drying, the right way
Drying is about moving moist air out and bringing dry air in. For small, clean-water spills, you can often make good progress yourself.
- Run fans and a dehumidifier if power in the area is safe to use.
- Run the air conditioning in humid weather. In dry weather, opening windows can help.
- Do not use a home heater to "bake" the room. Heat without dehumidification can push moisture deeper and speed up mold.
- Do not paint, caulk or install new flooring over wet materials.
The problem is moisture you cannot see. Drywall can look dry while the back side and the insulation behind it are still wet. Wood subfloors and concrete hold water for days. Professionals use moisture meters and thermal cameras to find this hidden water and track drying until materials reach a normal level. Learn more in how long water damage takes to dry.
When to call a professional
Some situations are beyond a mop and a box fan. Call a water damage professional if:
| Situation | Why it needs a pro |
|---|---|
| Water came from a sewer, toilet with waste, or outdoor flooding | Category 3 water can carry bacteria and viruses; porous materials usually must be removed safely |
| Water soaked carpet across a whole room or more | Pad and subfloor often stay wet under the surface |
| Water is in walls, ceilings or under cabinets | Hidden moisture needs meters, sometimes small openings, and directed airflow |
| Water sat for more than a day or two | Mold risk rises, and water quality can get worse |
| Hardwood floors are cupping | Specialty drying may save floors that would otherwise be replaced |
| You notice a musty smell or visible mold | May need mold remediation, not just drying |
A professional crew will extract water with truck-mounted or portable units, set air movers and dehumidifiers, remove materials that cannot be saved, and check moisture daily. They also document readings, which helps with insurance.
Our referral service is free for homeowners. Call (855) 742-6216 and we will connect you with an independent local restoration company that offers water damage restoration around the clock.
Your first-48-hours checklist
Use this as a quick reference. Check items off as you go.
- Check for electrical, gas and structural hazards.
- Shut off the water at the main valve or fixture.
- Turn off power to wet areas if it is safe to reach the panel.
- Photograph and video all damage and the source.
- Call your insurance company and write down the claim number.
- Remove standing water if it is clean and safe to do so.
- Move furniture, rugs, valuables and documents to a dry area.
- Start airflow and dehumidification.
- Call a restoration company if water is extensive, dirty or hidden.
- Keep every receipt and a written log of what you did and when.
If you are not sure what can be kept, read what can be saved after water damage.
Frequently asked questions
What is the first thing to do after water damage?
Make sure it is safe, then stop the water. If water is near outlets or the electrical panel, keep out of it and shut off power only if you can reach the breaker from a dry spot. Next, close the main water shutoff valve or the valve at the leaking fixture. Once the source is stopped, photograph the damage and call your insurance company.
How long can water sit before mold grows?
The EPA recommends drying water-damaged materials within 24 to 48 hours to help prevent mold growth. Mold does not follow an exact timer. Warm temperatures, dirty water and materials like drywall and carpet pad can speed it up. That is why starting drying the same day matters, and why hidden moisture inside walls should be checked with a meter.
Can I clean up water damage myself?
Small spills of clean water, such as a sink overflow caught quickly, can often be handled with towels, a wet/dry vacuum, fans and a dehumidifier. Bring in a professional if the water is from sewage or flooding, if it spread across a large area, if it got into walls or under flooring, or if it sat for more than a day. Hidden moisture is the main reason DIY drying fails.
Should I call insurance or a restoration company first?
You can do both the same day. Many homeowners call a restoration company first to stop ongoing damage, then call their insurer. Policies generally expect you to prevent further damage, so emergency drying is usually reasonable. Document everything, keep receipts, and avoid signing any contract that hands your insurance rights to the contractor without reading it carefully.
Is it safe to stay in a house with water damage?
Often yes, if the damage is limited to clean water in one area and the electricity is safe. It may not be safe if water came from sewage or flooding, if the ceiling is sagging, if there is visible mold, or if the power to large parts of the home is off. People with asthma, allergies or weak immune systems should be especially careful. Ask your insurer about additional living expenses.
Do fans alone dry water damage?
Fans help, but they move moist air around rather than removing moisture. Without a dehumidifier or good outside air exchange, humidity can rise and slow drying. Professionals pair air movers with dehumidifiers and measure moisture in walls and floors until materials return to normal levels. For anything beyond a small, surface-level spill, fans alone are rarely enough.
Related services
More guides
- Water Damage Categories (1, 2, 3) and Classes (1 to 4) Explained
- Does Homeowners Insurance Cover Water Damage? What Is Covered and What Is Not
- How to File a Water Damage Insurance Claim, Step by Step
- Flood Insurance Explained: Flood vs Water Damage, the NFIP and Private Flood
- How Long Does It Take to Dry Water Damage? The Process, Equipment and Timelines
- Mold After Water Damage: Why 24 to 48 Hours Matters and When to Call a Pro
- The Mold Remediation Process: What Professionals Do, Step by Step
- Burst Pipes and Frozen Pipes: What to Do Right Now and How to Prevent Them
- Sewage Backup in Your Home: Causes, Health Risks and What to Do
- Sump Pump Failure and Basement Flooding: Why Pumps Fail and What to Do
- What to Do After a House Fire: Safety, Insurance and Recovery, Step by Step
- Smoke Odor Removal: Soot Types, Cleaning Methods and What Actually Works
- How to Choose a Water, Fire or Mold Restoration Company
- What Drives Water Damage Restoration Cost (and How It Is Billed)
- Storm Damage Checklist: What to Do Before and After a Hurricane or Severe Storm
- Signs of a Hidden Water Leak: How to Find Leaks Behind Walls and Under Floors
- What Can Be Saved After Water Damage? A Material-by-Material Guide
Get restoration help
Water, flood, mold, fire, smoke and storm damage. Many local companies answer around the clock.
Call (855) 742-6216