Restoration services
Water Damage Restoration
Water damage gets worse by the hour. Water wicks up drywall, soaks into carpet pad and subfloors, and spreads into places you cannot see. According to the EPA, mold can start growing on damp materials within 24 to 48 hours. The sooner a professional crew removes the water and starts controlled drying, the more of your home can usually be saved.
The Restoration Resource is a free referral service for homeowners. We are not a restoration company and we do not do the work ourselves. When you call (855) 742-6216, we connect you with an independent local restoration company that can inspect the damage, start drying and document the job for your insurance. Many of these companies offer 24/7 emergency response.
When you need water damage restoration
- Standing water from a leak, overflow or broken supply line
- Wet or squishy carpet, swollen baseboards or warped floors
- Water stains or sagging spots on ceilings or walls
- Bubbling or peeling paint and wallpaper
- A musty smell that was not there before
- Water from a failed water heater, dishwasher or washing machine
- Leaks behind walls, under floors or above ceilings
- Water damage after firefighting or a roof leak
What Professional Water Damage Restoration Includes
Reputable restoration companies follow the IICRC S500, the industry standard for professional water damage restoration published by the Institute of Inspection, Cleaning and Restoration Certification. The exact steps vary by job, but a typical process looks like this:
- Emergency contact and arrival. The company asks what happened, where the water came from and whether the power is safe.
- Safety check and source control. The crew confirms the water source is stopped and checks for electrical hazards, slip risks and contamination.
- Inspection and moisture mapping. Using moisture meters and thermal cameras, technicians trace how far the water traveled, including inside walls and under floors.
- Category and class. The water is rated by contamination (Category 1, 2 or 3) and by how much evaporation is needed (Class 1 to 4). This decides what must be removed and how drying is set up.
- Water extraction. Powerful pumps and extractors remove standing water and as much water as possible from carpet and pad.
- Removal of unsalvageable materials. Wet pad, saturated insulation and badly damaged drywall are cut out and documented with photos.
- Structural drying. Air movers and dehumidifiers are placed to dry the building in a controlled way.
- Daily monitoring. Moisture and humidity readings are recorded until materials reach their drying goal.
- Cleaning and antimicrobial treatment where needed, especially for Category 2 or 3 water.
- Repairs and rebuild. Drywall, flooring, trim and paint are replaced, sometimes by the same company and sometimes by a separate contractor.
A written log of readings is your proof that the home is truly dry, not just dry to the touch.
Water Categories and Classes (IICRC S500)
The S500 standard sorts water damage two ways. The category describes how contaminated the water is. The class describes how much water was absorbed and how hard drying will be.
| Rating | What it means | Common examples |
|---|---|---|
| Category 1 | Clean water from a sanitary source | Broken supply line, overflowing sink with clean water |
| Category 2 | Significant contamination that could cause illness (often called gray water) | Dishwasher or washing machine discharge, toilet overflow with urine only |
| Category 3 | Grossly contaminated water (often called black water) | Sewage, rising floodwater from rivers or streams, seawater |
| Class 1 | Small area, little water absorbed | Part of one room, mostly low-porosity materials |
| Class 2 | Large amount of water, carpet and walls wet | Whole room with carpet and wet lower walls |
| Class 3 | Most surfaces saturated | Water from above that soaked ceilings, walls and floors |
| Class 4 | Specialty drying of dense materials | Hardwood, plaster, concrete, stone |
Category can get worse over time. The IICRC notes that clean water left standing, or water that touches contaminated materials, can degrade to Category 2 or 3. Learn more in our guide to water damage categories and classes.
Equipment a Restoration Crew Uses
Professional drying is not the same as opening windows and running a box fan. A restoration crew typically brings:
- Truck-mounted or portable extractors to pull water out of carpet, pad and hard floors.
- Submersible pumps for deep standing water.
- Moisture meters (pin and pinless) to measure moisture inside drywall, wood and subfloors.
- Thermal imaging cameras that show temperature differences that can point to hidden wet areas. They guide the meter readings but do not measure moisture by themselves.
- Hygrometers to track temperature and humidity in the room.
- Air movers that push air across wet surfaces to speed evaporation.
- Low-grain refrigerant (LGR) or desiccant dehumidifiers that pull the evaporated moisture out of the air.
- Wall cavity and floor drying systems that push dry air into walls, under cabinets or through hardwood floors.
- HEPA air scrubbers when dust, mold or contamination is a concern.
The equipment is noisy and runs around the clock. Keep it running and in place unless the crew tells you otherwise.
How Long Water Damage Restoration Takes
There is no single answer, because drying time depends on how much water there was, what materials got wet and how fast help arrived. Drying is finished when meter readings show materials have reached their drying goal, not when a certain number of days has passed.
| Phase | What happens | Typical length |
|---|---|---|
| Emergency response | Inspection, extraction, removal of wet materials | Usually the first visit, often a few hours |
| Structural drying | Air movers and dehumidifiers run with daily readings | Commonly several days; longer for hardwood, plaster or concrete |
| Insurance review | Adjuster reviews scope, photos and drying logs | Varies by insurer and claim size |
| Repairs | Drywall, flooring, cabinets, paint | Days to weeks, depending on scope and materials |
See how long it takes to dry water damage for what slows drying down.
What Can Be Saved and What Is Usually Thrown Away
What can be saved depends on the water category, the material and how long it stayed wet. The general patterns below follow IICRC guidance, but the crew decides item by item.
| Material | Clean water (Cat 1), dried fast | Contaminated water (Cat 3) |
|---|---|---|
| Carpet | Often saved by drying in place | Usually discarded |
| Carpet pad | Sometimes saved, often replaced | Discarded |
| Drywall | Often dried in place if not swollen or crumbling | Affected sections removed |
| Insulation | Wet batts usually removed | Removed |
| Hardwood floors | Often saved with specialty drying; may cup at first | Case by case, often replaced |
| Particleboard and MDF cabinets | Often swell and need replacement | Discarded |
| Solid wood furniture | Usually cleaned and dried | Cleaned and disinfected if possible |
| Upholstered furniture and mattresses | Sometimes saved | Usually discarded |
Our guide on what can be saved after water damage covers documents, photos and electronics.
What to Do While You Wait (and What Not to Do)
Your safety comes first. Then focus on stopping the water and protecting what you can.
Do:
- Shut off the main water valve or the valve for the leaking fixture.
- If water is near outlets, cords or the panel, turn off power at the breaker only if you can reach it from a dry spot. Otherwise call the utility or an electrician.
- Take photos and video of everything before anything is moved.
- Move small furniture, rugs and valuables to a dry area. Put foil or wood blocks under furniture legs that must stay.
- Call your insurance company to report the loss.
Don't:
- Don't use a household vacuum to pick up water. It is an electrical shock risk and can ruin the vacuum.
- Don't use ceiling fans or lights if the ceiling is wet or sagging.
- Don't touch water from a sewer or flood without protective gear.
- Don't throw items away before they are photographed for the claim.
Our step-by-step guide on what to do after water damage goes deeper.
Does Homeowners Insurance Cover Water Damage?
Standard homeowners policies usually cover water damage that is sudden and accidental, such as a supply line that bursts or a water heater that fails without warning. Every policy is different, so read yours or ask your agent.
Common exclusions include:
- Gradual leaks and damage caused by poor maintenance, such as a slow drip under a sink over months.
- Flood, meaning surface water from outside. That needs a separate flood policy through the NFIP or a private insurer.
- Sewer or drain backup, which usually needs a water backup endorsement.
- The cost to fix the broken pipe or appliance itself, even when the resulting damage is covered.
Most policies also require you to take reasonable steps to prevent further damage, which is one reason to start mitigation quickly. Keep every receipt and copy of the drying log. Read more in does homeowners insurance cover water damage and our water damage insurance claim guide.
What Affects the Cost of Water Damage Restoration
Every job is priced on its own scope. Most restoration companies and insurers use estimating software such as Xactimate, which prices line items like extraction, equipment days and materials removed. The main cost factors are:
- Water category. Contaminated water needs protective gear, more material removal and disinfection.
- Size of the affected area and how many rooms or floors are wet.
- Materials involved. Hardwood, plaster and concrete take longer to dry than carpet and drywall.
- How long the water sat before drying started, and whether mold has begun.
- Equipment days needed to reach the drying goal.
- Demolition and rebuild, such as cabinets, flooring and drywall.
- Contents work, like moving, cleaning or packing out belongings.
- After-hours or holiday response for emergencies.
Our water damage restoration cost guide explains how estimates are built and what to ask.
How to Choose a Water Damage Restoration Company
When you are stressed and standing in water, it is easy to hire the first company that answers. A few checks protect you:
- IICRC certification. Ask whether the company and its lead technicians hold IICRC certification, such as Water Damage Restoration Technician (WRT) or Applied Structural Drying (ASD).
- License and insurance. Ask for proof of general liability and workers' compensation insurance, and any license your state requires.
- 24/7 availability. Many companies offer round-the-clock emergency response. Ask when they can actually be on site.
- Written scope. Get a written description of the work, with photos and moisture readings.
- Insurance-friendly estimates. Companies that use Xactimate speak the same language as most adjusters.
- Read before you sign. Be careful with assignment of benefits (AOB) forms, which hand your insurance claim rights to the contractor. Some states, including Florida, now restrict them. You can usually authorize work without signing over your benefits.
See our full checklist on choosing a restoration company, or call (855) 742-6216 and we will connect you with an independent local company.
How to Prevent Water Damage
Most household water damage starts with plumbing or appliances. A few habits lower the risk:
- Know where your main water shutoff is and make sure it turns easily.
- Replace rubber washing machine hoses with braided stainless steel hoses and check them regularly.
- Inspect supply lines under sinks and toilets, and the area around your water heater, a few times a year.
- Install water leak sensors, or an automatic shutoff valve that closes the main when a leak is detected.
- Keep gutters clean and downspouts pointed away from the foundation.
- Protect pipes from freezing in cold weather. See burst pipe water damage.
- Turn off the main water supply when you leave home for long periods.
Small, slow leaks are easy to miss. Learn the signs of a hidden water leak.
How it works
- Call (855) 742-6216Tell us what happened (water, flood, mold, fire or storm) and where the property is.
- Get connectedWe connect your call with an independent restoration company serving your area.
- Get it handledThe company inspects, explains the scope in writing and works with you and your insurer. You decide whether to go ahead.
Frequently asked questions
How long does water damage restoration take?
The emergency visit, including inspection and water extraction, often takes a few hours. Structural drying commonly runs several days, and dense materials like hardwood, plaster or concrete can take longer. Drying is complete when moisture readings reach the drying goal, not on a fixed date. Repairs such as drywall, flooring and paint are a separate phase that can take days to weeks depending on the scope.
Will mold grow after water damage?
It can. According to the EPA, mold can begin growing on damp materials within 24 to 48 hours, which is why fast extraction and drying matter so much. Mold is not guaranteed, but the risk rises the longer materials stay wet. If you already see or smell mold, read our page on mold remediation.
Can I dry water damage myself?
Small spills of clean water caught right away can often be handled with towels, a wet/dry vacuum, fans and a dehumidifier. Larger leaks are different, because water spreads into walls, subfloors and insulation where you cannot see or measure it. Professionals use moisture meters to confirm materials are truly dry. Anything involving sewage or floodwater should be handled by a professional crew.
Does homeowners insurance pay for water damage restoration?
Usually, if the damage was sudden and accidental, such as a burst pipe or failed appliance. Policies typically exclude gradual leaks, poor maintenance and flooding from outside water, and sewer backup often needs a separate endorsement. Report the loss quickly, document everything and keep the drying records. Check your own policy or ask your agent for specifics.
Do I have to remove wet drywall?
Not always. Drywall wet with clean water can often be dried in place if it has not swollen, crumbled or started to grow mold. Drywall touched by sewage or floodwater is usually cut out, and wet insulation behind it is generally removed. The restoration crew decides based on moisture readings and the water category.
What is the difference between water mitigation and water restoration?
Mitigation is the emergency phase: stopping further damage by extracting water, removing wet materials and drying the structure. Restoration usually means the repair phase afterward, such as replacing drywall, flooring and cabinets. Some companies do both, while others focus on mitigation and hand off repairs to a general contractor.
Is your service free?
Yes. Our referral service is free for homeowners. We are not a restoration company. When you call (855) 742-6216, we connect you with an independent local restoration company that serves your area. Any work, pricing and insurance billing is between you and that company.
Related guides
- What to Do After Water Damage: The First 24 to 48 Hours, Step by Step
- Water Damage Categories (1, 2, 3) and Classes (1 to 4) Explained
- Does Homeowners Insurance Cover Water Damage? What Is Covered and What Is Not
- How to File a Water Damage Insurance Claim, Step by Step
- How Long Does It Take to Dry Water Damage? The Process, Equipment and Timelines
- Mold After Water Damage: Why 24 to 48 Hours Matters and When to Call a Pro
Water Damage Restoration by city
- New York, NY
- Los Angeles, CA
- Chicago, IL
- Houston, TX
- Phoenix, AZ
- Philadelphia, PA
- San Antonio, TX
- San Diego, CA
- Dallas, TX
- San Jose, CA
- Austin, TX
- Jacksonville, FL
- Fort Worth, TX
- Columbus, OH
- Charlotte, NC
- Indianapolis, IN
- San Francisco, CA
- Seattle, WA
- Denver, CO
- Oklahoma, OK
- Nashville, TN
- El Paso, TX
- Washington, DC
- Boston, MA
- Las Vegas, NV
- Portland, OR
- Detroit, MI
- Memphis, TN
- Louisville, KY
- Baltimore, MD
Other restoration services
Flood Damage Cleanup
Find a local crew to pump out floodwater, remove contaminated materials, disinfect and dry your home safely.
Basement Flooding & Water Removal
Get help pumping out a flooded basement, drying walls and floors, and finding out why the water got in.
Burst Pipe Water Damage
When a pipe bursts or freezes, get connected with a local crew to remove the water and dry walls, floors and ceilings.
Sewage Backup Cleanup
Sewage is a health hazard. Get connected with a local crew trained to remove, disinfect and dry contaminated areas safely.
Mold Remediation
Get connected with a local mold remediation company that contains, removes and cleans mold and fixes the moisture behind it.
Fire Damage Restoration
After a house fire, get connected with a local restoration company for board-up, soot and water cleanup, odor removal and repairs.
Smoke & Soot Damage Cleanup
Get connected with a local pro to clean soot, remove smoke odor and clean HVAC systems after a fire, puffback or wildfire smoke.
Storm Damage Restoration
After a hurricane, tornado, hail or windstorm, get connected with a local crew for tarping, board-up, water removal and repairs.
Get restoration help
Water, flood, mold, fire, smoke and storm damage. Many local companies answer around the clock.
Call (855) 742-6216