(855) 742-6216

Utah · Salt Lake County

Mold Remediation in Salt Lake, UT

Musty smell, visible growth, or mold after a leak or flood in Salt Lake, UT? Call (855) 742-6216 to reach a local mold remediation company that can find the moisture source, contain the area and remove the mold safely.

Call (855) 742-6216Free referral service for homeowners
  • Mold inspection & testing
  • Containment & HEPA cleanup
  • Moisture source repair
  • Attics, crawl spaces, basements

Based on NOAA, FEMA and U.S. Census data.

Mold after water damage in Salt Lake

Salt Lake has a dry climate, so surfaces dry faster, but mold still grows inside walls, under floors and behind cabinets where water is trapped. Leaks from supply lines and evaporative coolers are common causes.

Utah does not have a statewide mold remediation license, so ask for IICRC certification (such as Applied Microbial Remediation Technician) and proof of insurance, and ask whether the company follows the IICRC S520 standard.

The EPA says areas of mold larger than about 10 square feet are a job for a professional. Mold remediation · mold after water damage.

Flood and water damage risk in Salt Lake County

Source: NOAA NCEI Storm Events Database, Salt Lake County, January 2021 to August 2026. Counts are days (or events) with at least one report.

Event (NOAA)January 2021 – August 2026
Flood events (river and areal flooding)6
Flash flood days9
Heavy rain events reported1
Winter storm, snow and ice days52
Damaging thunderstorm wind days (58+ mph)51
Wildfire days1
Property damage reported from flooding and heavy rain$19.0 million

NOAA recorded flood, flash flood or heavy rain events on 13 days in Salt Lake County between January 2021 and August 2026, the latest in August 2026. Even a single storm can push water into basements, crawl spaces and ground-floor rooms.

The costliest single water event in the county in this period was a flash flood on August 3, 2023, with about $16.0 million in reported property damage.

Flash floods rise within hours of heavy rain, often in places that are not in a mapped flood zone. Water entering from outside is usually treated as Category 3 (contaminated) water by restoration companies, so porous materials it touches are typically removed, not just dried.

Homes in Salt Lake: where water damage usually starts

The typical home in Salt Lake was built around 1963. Many have copper supply lines now 45 or more years old, plus original galvanized sections, shutoff valves and drain lines that tend to fail with age. Homes of this age may also contain asbestos or lead paint in materials a restoration crew may need to remove, which requires testing first.

Basements are common in Utah. A finished basement can hold a lot of water before anyone notices, and it is where sump pump failures, foundation seepage and sewer backups show up first. See basement flooding and water removal.

Salt Lake has about 97,318 homes and apartments, 47% of them owner-occupied. In apartments and condos, a leak in one unit often damages the units below, and the building’s master policy and your own policy may each cover different parts.

Signs of a hidden leak →

How mold remediation works

When You Need Professional Mold Remediation

The EPA's guidance offers a useful rule of thumb: if the moldy area is less than about 10 square feet (roughly a 3 foot by 3 foot patch), you can often handle it yourself following EPA cleanup advice. Call a professional when:

The EPA also advises against running an HVAC system you suspect is contaminated with mold, because it can spread spores through the home.

Mold Conditions Under the IICRC S520 Standard

Professional mold remediation follows the IICRC S520, the standard for professional mold remediation. It describes three conditions, which help define the goal of the job:

ConditionWhat it meansGoal
Condition 1Normal fungal ecology: the kinds and amounts of mold you would expect in a clean indoor environmentThe target after remediation
Condition 2Settled spores: area contaminated with spores or mold fragments that came from elsewhere, without active growthClean back to Condition 1
Condition 3Actual growth: active or dormant visible or hidden mold growthRemove growth and return to Condition 1

In plain terms, the job is not finished until the affected areas are back to normal, and the moisture problem is solved. This is also why simply spraying a product on visible mold falls short of the standard. Mold that is killed but left in place can still contain allergens, and spores that settled on nearby surfaces during the problem need to be cleaned up too.

The Mold Remediation Process Step by Step

  1. Inspection. The company looks for visible mold, measures moisture and tries to find the water source. Some homeowners also hire an independent assessor.
  2. Fix the moisture. Leaks, condensation or drainage problems must be corrected, or the mold will return.
  3. Containment. The work area is sealed with plastic sheeting. Negative air pressure, created with air machines that exhaust filtered air, helps keep spores from spreading to clean rooms.
  4. Protective equipment. Workers wear respirators, gloves, eye protection and often disposable suits.
  5. HEPA air filtration runs during the work to capture airborne spores and dust.
  6. Removal of moldy porous materials, such as drywall, insulation and carpet, which are bagged and removed carefully.
  7. Cleaning of salvageable surfaces like framing and hard surfaces, usually with HEPA vacuuming, damp wiping and scrubbing or sanding where needed.
  8. Drying of the area with dehumidifiers.
  9. Post-remediation verification. A visual check, and sometimes testing by an independent professional, confirms the area is clean before rebuilding.
  10. Rebuild with new drywall, insulation and finishes.

Learn more in our guide to the mold remediation process.

Read the full mold remediation guide →

Choosing a restoration company in Salt Lake

Full checklist for choosing a restoration company →

Insurance and water damage in Salt Lake

Standard homeowners policies in Utah typically cover water damage that is sudden and accidental, such as a burst pipe or a washing machine hose that fails. They typically do not cover damage from long-term leaks, poor maintenance, or flooding (rising water from outside). Sewer and drain backup is usually covered only with an added endorsement. Read your own policy and ask your agent.

Flood insurance matters here. Flood coverage comes from the National Flood Insurance Program (NFIP) or a private flood insurer. NFIP policies usually have a 30-day waiting period before they take effect, and coverage in basements is limited. You do not need to live in a high-risk zone to buy it.

Your policy requires you to take reasonable steps to prevent more damage. Emergency water extraction and drying count as that, so keep the paperwork. Be careful with any form that hands over your insurance benefits to a contractor (an assignment of benefits); read it fully before you sign.

What homeowners insurance covers · how to file a water damage claim

Restoration services in Salt Lake

Mold Remediation: Salt Lake questions

How do I know if I need mold remediation in Salt Lake?

If mold covers more than about 10 square feet (EPA guidance), keeps coming back, follows a flood or sewage backup, or is inside walls or HVAC, have a professional handle it. Musty odors after a leak are a common sign of hidden growth.

When did Salt Lake County last flood?

The most recent flood, flash flood or heavy rain report for Salt Lake County in NOAA’s Storm Events Database is from August 2026. NOAA logged such events on 13 days between January 2021 and August 2026.

Has Salt Lake County had a federal disaster declaration?

Yes. FEMA has issued 9 declarations covering Salt Lake County since 2000. The most recent, “Parleys Canyon Fire,” began in August 2021.

Do mold remediation companies need a license in Utah?

Utah does not have a statewide mold remediation license. Ask for IICRC certification, proof of insurance, and whether the company follows the IICRC S520 standard; some cities have their own rules.

Does homeowners insurance cover water damage in Utah?

Usually yes if the damage is sudden and accidental, such as a burst pipe. Flood damage needs separate flood insurance, and gradual leaks are usually excluded. Sewer backup typically needs an endorsement. Check your policy.

How long does it take to dry out water damage?

Drying with professional equipment usually takes several days for a typical indoor water loss, longer for hardwood, plaster, or large floods. The restoration crew takes moisture readings daily and removes equipment once materials reach the dry standard.

Nearby cities

All Utah locations →

Get restoration help in Salt Lake, UT

Water, flood, mold, fire, smoke and storm damage. Many local companies answer around the clock.

Call (855) 742-6216
Call (855) 742-6216