Texas · Wichita County
Mold Remediation in Wichita Falls, TX
Musty smell, visible growth, or mold after a leak or flood in Wichita Falls, TX? Call (855) 742-6216 to reach a local mold remediation company that can find the moisture source, contain the area and remove the mold safely.
- Mold inspection & testing
- Containment & HEPA cleanup
- Moisture source repair
- Attics, crawl spaces, basements
Based on NOAA, FEMA and U.S. Census data.
Mold after water damage in Wichita Falls
Wichita Falls has a warm, humid climate, which is exactly what mold needs. After a leak or flood, mold can start growing within 24 to 48 hours (EPA), and humid outdoor air slows natural drying. Professional drying with dehumidifiers and moisture readings is the safest way to stop it.
Texas licenses mold remediation work through the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and check it before work starts.
The EPA says areas of mold larger than about 10 square feet are a job for a professional. Mold remediation · mold after water damage.
Flood and water damage risk in Wichita County
Source: NOAA NCEI Storm Events Database, Wichita County, January 2021 to August 2026. Counts are days (or events) with at least one report.
| Event (NOAA) | January 2021 – August 2026 |
|---|---|
| Flood events (river and areal flooding) | 3 |
| Flash flood days | 1 |
| Winter storm, snow and ice days | 5 |
| Extreme cold days (frozen-pipe risk) | 4 |
| Damaging thunderstorm wind days (58+ mph) | 33 |
| Tornadoes | 2 |
| Wildfire days | 7 |
Wichita County has fewer weather-driven floods than many parts of the country, so most water damage in Wichita Falls homes starts inside: burst or leaking supply lines, failed water heaters, washing machine hoses, toilets, dishwashers and roof leaks.
Homes in Wichita Falls: where water damage usually starts
The typical home in Wichita Falls was built around 1971. Many have copper supply lines now 45 or more years old, plus original galvanized sections, shutoff valves and drain lines that tend to fail with age. Homes of this age may also contain asbestos or lead paint in materials a restoration crew may need to remove, which requires testing first.
Most homes in Texas are built on slabs or over crawl spaces rather than basements. Slab leaks and crawl space moisture are hard to see; warning signs include warm spots on floors, a running water meter with all taps off, musty odors and buckling flooring.
Wichita Falls has about 43,396 homes and apartments, 57% of them owner-occupied. In apartments and condos, a leak in one unit often damages the units below, and the building’s master policy and your own policy may each cover different parts.
How mold remediation works
When You Need Professional Mold Remediation
The EPA's guidance offers a useful rule of thumb: if the moldy area is less than about 10 square feet (roughly a 3 foot by 3 foot patch), you can often handle it yourself following EPA cleanup advice. Call a professional when:
- Mold covers more than about 10 square feet.
- Mold is inside walls, ceilings, ductwork or the HVAC system.
- The mold came from sewage or other contaminated water.
- Someone in the home has asthma, allergies, a weakened immune system or other health concerns.
- Mold keeps coming back after cleaning.
- You smell mold but cannot find it.
The EPA also advises against running an HVAC system you suspect is contaminated with mold, because it can spread spores through the home.
Mold Conditions Under the IICRC S520 Standard
Professional mold remediation follows the IICRC S520, the standard for professional mold remediation. It describes three conditions, which help define the goal of the job:
| Condition | What it means | Goal |
|---|---|---|
| Condition 1 | Normal fungal ecology: the kinds and amounts of mold you would expect in a clean indoor environment | The target after remediation |
| Condition 2 | Settled spores: area contaminated with spores or mold fragments that came from elsewhere, without active growth | Clean back to Condition 1 |
| Condition 3 | Actual growth: active or dormant visible or hidden mold growth | Remove growth and return to Condition 1 |
In plain terms, the job is not finished until the affected areas are back to normal, and the moisture problem is solved. This is also why simply spraying a product on visible mold falls short of the standard. Mold that is killed but left in place can still contain allergens, and spores that settled on nearby surfaces during the problem need to be cleaned up too.
The Mold Remediation Process Step by Step
- Inspection. The company looks for visible mold, measures moisture and tries to find the water source. Some homeowners also hire an independent assessor.
- Fix the moisture. Leaks, condensation or drainage problems must be corrected, or the mold will return.
- Containment. The work area is sealed with plastic sheeting. Negative air pressure, created with air machines that exhaust filtered air, helps keep spores from spreading to clean rooms.
- Protective equipment. Workers wear respirators, gloves, eye protection and often disposable suits.
- HEPA air filtration runs during the work to capture airborne spores and dust.
- Removal of moldy porous materials, such as drywall, insulation and carpet, which are bagged and removed carefully.
- Cleaning of salvageable surfaces like framing and hard surfaces, usually with HEPA vacuuming, damp wiping and scrubbing or sanding where needed.
- Drying of the area with dehumidifiers.
- Post-remediation verification. A visual check, and sometimes testing by an independent professional, confirms the area is clean before rebuilding.
- Rebuild with new drywall, insulation and finishes.
Learn more in our guide to the mold remediation process.
Choosing a restoration company in Wichita Falls
- IICRC certification. The Institute of Inspection Cleaning and Restoration Certification sets the industry standards (S500 for water damage, S520 for mold). Ask which technicians on your job hold Water Damage Restoration Technician (WRT) or Applied Structural Drying (ASD) certification.
- Insurance. Ask for a certificate of general liability and workers’ compensation insurance sent by the insurer.
- A written scope and moisture records. A good company shows you moisture readings and photos each day and removes equipment only when materials reach dry standard.
- Insurance-friendly estimates. Most insurers price restoration in Xactimate. A company that writes estimates in the same format makes the claim smoother.
- Local presence. After big storms, out-of-area crews arrive. Look for a local address and reviews from past local jobs.
- Mold license. In Texas, mold remediation requires a license from the Texas Department of Licensing and Regulation (TDLR).
Insurance and water damage in Wichita Falls
Standard homeowners policies in Texas typically cover water damage that is sudden and accidental, such as a burst pipe or a washing machine hose that fails. They typically do not cover damage from long-term leaks, poor maintenance, or flooding (rising water from outside). Sewer and drain backup is usually covered only with an added endorsement. Read your own policy and ask your agent.
Flood coverage comes from the National Flood Insurance Program (NFIP) or a private flood insurer. NFIP policies usually have a 30-day waiting period before they take effect, and coverage in basements is limited. You do not need to live in a high-risk zone to buy it.
Your policy requires you to take reasonable steps to prevent more damage. Emergency water extraction and drying count as that, so keep the paperwork. Be careful with any form that hands over your insurance benefits to a contractor (an assignment of benefits); read it fully before you sign.
What homeowners insurance covers · how to file a water damage claim
Restoration services in Wichita Falls
Mold Remediation: Wichita Falls questions
How do I know if I need mold remediation in Wichita Falls?
If mold covers more than about 10 square feet (EPA guidance), keeps coming back, follows a flood or sewage backup, or is inside walls or HVAC, have a professional handle it. Musty odors after a leak are a common sign of hidden growth.
When did Wichita County last flood?
The most recent flood, flash flood or heavy rain report for Wichita County in NOAA’s Storm Events Database is from June 2026. NOAA logged such events on 4 days between January 2021 and August 2026.
Has Wichita County had a federal disaster declaration?
Yes. FEMA has issued 16 declarations covering Wichita County since 2000. The most recent, “County Line Fire,” began in December 2021.
Do mold remediation companies need a license in Texas?
Yes. Texas licenses mold remediation through the Texas Department of Licensing and Regulation (TDLR).
Does homeowners insurance cover water damage in Texas?
Usually yes if the damage is sudden and accidental, such as a burst pipe. Flood damage needs separate flood insurance, and gradual leaks are usually excluded. Sewer backup typically needs an endorsement. Check your policy.
How long does it take to dry out water damage?
Drying with professional equipment usually takes several days for a typical indoor water loss, longer for hardwood, plaster, or large floods. The restoration crew takes moisture readings daily and removes equipment once materials reach the dry standard.
Nearby cities
- Restoration in Burkburnett, TX 12 mi
- Restoration in Lawton, OK 49 mi
- Restoration in Duncan, OK 51 mi
- Restoration in Altus, OK 68 mi
- Restoration in Mineral Wells, TX 79 mi
- Restoration in Gainesville, TX 81 mi
- Restoration in Ardmore, OK 82 mi
- Restoration in Azle, TX 90 mi
- Restoration in Weatherford, TX 91 mi
- Restoration in Denton, TX 93 mi
Get restoration help in Wichita Falls, TX
Water, flood, mold, fire, smoke and storm damage. Many local companies answer around the clock.
Call (855) 742-6216